Crane EE-8243 Manuale Utente Pagina 10

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 53
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 9
1
2
3
4
Lenny Arm
®
II Plus Cable Bracket Placement
Configuration #56
Part #5658
5 Wide
Bucket
Only the Cables on the right side of the
Lenny Arm are shown for clarity.
The Operator should be Qualified. For Assistance Please call our 24 hour Customer Service at 1-888-883-6559 or 1-818-764-6726.
© 2000 No part of this manual may be reproduced or electronically transmitted without
the written permission of Chapman/Leonard Studio Equipment, Inc.
9
Revision 19 - 7/2008
Cable Bracket
attaches here
on both sides.
Cable Bracket
attaches here
on both sides.
Cable Bracket
attaches here
on both sides.
Warning! The configuration
shown here includes the 7
1
/2
Riser and is for unmanned or
remote use ONLY.
The Cable System
is Mandatory on this
Configuration.
Warning! When using the
Auxiliary Weight Bucket,
use of the Cable System is
Mandatory.
MH = Maximum Height (From lens to ground in underslung mode. Additional height may be
achieved by inverting remote head.) Note: In manned configurations add 2 to 4 feet to MH.
MR = Maximum Reach (As measured from center post to ideal camera position.)
MP = Maximum Payload.
BW = Bucket Weight for Balanced Arm (No Payload.)
BAW = Balanced Arm Weight (No Payload.)
MOW = Maximum Operational Weight of unit. (With 135 lb. Payload.)
ROW = Remote Operational Weight of unit. (With maximum payload and a full weight bucket.)
BR = Balance Ratio. (Determines the amount of weight required in bucket to balance a given
payload after arm itself has been balanced.)
PMH = Post Mount Height needed to obtain maximum height on level ground.
(Not to be exceeded.)
UW = Unit Weight.
IMD = Ideal Camera Mount Distance (From the Bearing to the Camera Mount.)
MH = 24’ (7.3 m)
MR = 21’ 8” (6.6 m)
MP = 600 lb. (272 kg)
BW = 295 lb. (134.1 kg)
BAW = 1,124 lb. (510.9 kg)
MOW = 3,700 lb. (1,681.8 kg)
ROW = 1,559 lb. (708.6 kg)
BR = 1:2.2
PMH = 75” (1.9 m)
IMD = 20”
BRACKET PLACEMENT with 4 SECTIONS
when using the 3 Cable System
UW = 829 lb. (376.8 kg)
Vedere la pagina 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 52 53

Commenti su questo manuale

Nessun commento